2. Wafer Sheet ReceiverMaterial: GB steel bar for machine frame
      Motor: SEW, Germany
      Size (L×W×H): 1723×1150×820mm
      Power: 0.18kW
    2. Wafer Cooling TowerMaterials: The machine frame and shell are made of GB steel bar and 304 stainless steel, respectively.
      Motor: SEW, Germany
      Size (L×W×H): 2600×1200×2430mm
      Power: 0.80kW
    2. Sheet Picking MachineOur sheet picking machine is well designed, and it is a very important device for the quality control. It is used to automatically check whether the wafer delivered from cooling tower to cream spreader is complete by receiving the PLC signal, and the incomplete ones are automatically collected for recycling.
    2. Wafer Cream SpreaderMaterials: GB steel and 304 stainless steel are used to produce the machine frame and shell, respectively.
      Motor and Reducer: SEW, Germany
      Frequency converter: Danfoss
      PLC: Mitsubishi, Japan
    2. Wafer Vertical Cooling CabinetTemperature: The temperature inside our machine is within 8℃ -12℃, and the temperature for the refrigerating unit can be set as low as -5℃.
      Materials: The machine frame is made of GB steel, and 304 stainless steel is used to make the shell.
      Heat insulating material: Polyurethane composited stainless steel plate with thickness of 150mm
      Major cooling system: Air/water cooling system
    2. Wafer Sheet ConveyorMaterials: The raw material for machine frame is GB steel, and the shell is made of 304 stainless steel.
      Motor: SEW, Germany
      Conveyor belt: Orange belt imported from Italy
      Size (L×W×H): 2200×1050×980mm
    2. Wafer Cutter and LaminatorMaterial: The machine frame is made of GB steel, and 304 stainless steel is adopted by the shell.
      Motor: SEW, Germany
      PLC: Siemens, Germany
      Switch: Schneider
    2. Batter MixerMaterials: The raw materials for frame and shell are GB steel and 304 stainless steel, respectively.
      Motor: SEW, Germany
      Switch: Schneider, Germany
      Mixing capacity: 60kg batter, which means that 25kg flour per time is applicable.
    2. Cream MixerMaterials: Imported stainless steel is used to make the shell and tank body, and it meets the international standard. Meanwhile, the steel for machine frame also conforms with the international standard.
      Motor: SEW, Germany
      Screw pump: Rotor pump
    2. Wafer Smashing MachineMaterials: The machine frame is made of GB steel, and imported 304 stainless steel is applied to make the shell and tank body.
      Motor: SEW, Germany
      Size (L×W×H): 690×610×1250mm
    2. Automatic Cream Delivering MachineMaterials: The steel for machine frame meets the GB standard, and the cream mixing tank is made of imported 304 stainless steel.
      Motor: SEW, Germany
      Pump: Rotor pump
    2. Cream Spreading MachineMaterials: The steel for frame conforms with GB standard, and the shell is made of imported 304 stainless steel.
      Cream layer: 2-5 layers
      Motor and reducer: SEW, Germany
      Frequency converter: Danfoss
    2. Wafer Reversing ConveyorMaterials: The raw material for shell is 304 stainless steel, and the steel for frame meets the GB standard.
      Size (L×W×H): 1700×1015×400mm
    2. Wafer Cutting MachineMaterials: GB steel and 304 stainless steel are used to make the frame and shell, respectively.
      Cutting height: 20mm-55mm
      Motor: SEW, Germany
      PLC: Siemens, Germany

Related Names
Assisting Food Device | Supplementary Facility | Auxiliary Food Machine | Assistant Equipment