Clients that are in favor of this 33 mould fully automatic wafer production line are usually familiar with the wafer biscuit and relevant equipment. Their factory is medium sized with a certain amount of capital, and the requirement for production capacity is neither too large nor too small. What they care about the most is whether this product can meet the technical requirement and daily output, and this product can well satisfy these clients. It is cheaper than the 39 mould type, and it is a preferred choice for the customers that want to save money.
What kind of customer can buy such a product?
1. Company that wants to make wafer biscuit for the first time
2. Client that has not produced wafer biscuit but quite familiar with relevant equipment
3. Factory that owns experience in producing waffle
4. Medium or small sized enterprise
Influencing Factors
Our production line consists of different machines, so the plant should be large enough, and the specific size for L×W×H is 60m×8m×(≥3.5m). Meanwhile, the cost, gas source and production capacity also contribute to the product selection.
Specifications
1. Production capacity: 3.0 tons/24 hours (20 pcs/min)
2. Total power: 39.868kW and the power supply is 380V/50Hz. The total power is 140kW if it is electrically heated.
3. Rate of finished product: ≥98%
4. Fuel gas pressure: 0.25-3.5kg/cm2
5. Gas consumption: 15kg/hour for liquefied gas, and 20-30m3/hour for natural gas.
6. Combustion value: 8.4 for liquefied gas, and 4.7 for natural gas.
7. Compressed air consumption and pressure: 0.9m3/min, 0.8Mpa
8. Baking plate size: 470mm×325mm
9. Effective cutting size of wafer sheet: 455mm×315mm
10. Baking time: 90 seconds
11. Overall dimensions (L×W×H): 24.7m×2.0m×2.5m
12. Overall weight: About 15.5 tons
13. Number of operators: 4 (packing staff is not included)
14. Installation and testing staff: 2 people
15. Installation and testing time: 3 weeks
16. Shipping: 2×40' HQ container
17. Delivery time: Within 90 days after the advance payment is received.
18. Packing: Seaworthy packing that meets the container standard
| Featured Machine | Supporting Machine | ||||||||||
| Name | Baking oven | Wafer sheet receiver | Wafer cooling tower | Sheet picking machine | Wafer cream spreader | Wafer vertical cooling cabinet | Wafer sheet conveyor | Wafer cutter and laminator | Batter mixer | Cream mixer | Wafer smashing machine |
| Qty. | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Quality Acceptance
This wafer production line is designed to smoothly make wafer biscuit, and the quality of wafer is ensured. The baked wafer has uniform color on the surface, and the end product is coated with cream evenly and the cut is straight. Meanwhile, all the machines run steadily without any abnormal noise, and the technical parameters of equipment meet the regulated values. The parameters above can be used to check the quality of our production line, and the production capacity and energy consumption can be tested at the same time.
Production speed: 20 pieces per minute
1. 50g wafer: cream:biscuit=1:1, 5 slices of biscuit and 4 layers of coating, 2.88 tons/24 hours
2. 50g wafer: cream:biscuit=1.25:1, 5 slices of biscuit and 4 layers of coating, 3.24 tons/24 hours
3. 50g wafer: cream:biscuit=1.35:1, 5 slices of biscuit and 4 layers of coating, 3.38 tons/24 hours
4. 50g wafer: cream:biscuit=1.5:1, 5 slices of biscuit and 4 layers of coating, 3.6 tons/24 hours
Our company is a specialized 33 mould fully automatic wafer production line manufacturer and supplier in China. We offer a wide range of products, including 75 mould automatic wafer line equipment, chocolate hazelnut ball production line, Special-shape wafer biscuit production line, etc.
Related Names
Automatic Flat Waffle Making Device | Full Automatic Board Waffle Product Line | Automation Flat Wafer Making Device
English
العربية
Español
Spare Part List (Gas baking oven)
