The 39 mould fully automatic wafer line machine is often favored by the purchasers that know well about the wafer and wafer production line. Their factories are medium sized, and they are not lack of money though the capital is not very abundant. Also, the production capacity is required to be sufficient, but no need to be too large. These clients are concentrated on the technical parameters and daily output, and our product is the ideal choice.
The client doesn't need to worry about the transportation cost because it is quite cheap, and it usually takes one week for our technical staff to finish the testing job in the client's factory, and it won't be longer than 2 weeks.
1. Client that is quite familiar with wafer production machines though has not produced wafer
2. Factory that has produced waffle
3. Medium or small sized plant
4. Customer that wants to make wafer for the first time
What are the factors that should be taken into account?
Considering the dimension of our wafer line machine, the factory size for L×W×H should be 60m×8m×(≥3.5m). Meanwhile, the cost, gas source and production capacity also contribute to the product selection.
1. Production capacity: 3.5 tons/24 hours (23 pcs/min)
2. Total power: 42.868kW and the power supply is 380V/50Hz. The total power will be 160kW if electrical heating is applied.
3. Rate of finished product: ≥98%
4. Fuel gas pressure: 0.25-3.5kg/cm2
5. Gas consumption: 19kg/hour for liquefied gas, and 20-30m3/hour for natural gas.
6. Combustion value: 8.4 for liquefied gas, and 4.7 for natural gas.
7. Compressed air consumption and pressure: 0.9m3/min, 0.8Mpa
8. Baking plate size: 470mm×325mm
9. Effective cutting size of wafer sheet: 455mm×315mm
10. Baking time: 90 seconds
11. Overall dimensions (L×W×H): 25.0m×2.0m×2.5m
12. Overall weight: About 17 tons
13. Number of operators: 4 (packing staff is not included)
14. Installation and testing staff: 2 people
15. Installation and testing time: 3 weeks
16. Shipping: 2×40' HQ container
17. Delivery time: Within 90 days after the advance payment is received.
18. Packing: Seaworthy packing that meets the container standard
|Featured Machine||Supporting Machine|
|Name||Baking oven||Wafer sheet receiver||Wafer cooling tower||Sheet picking machine||Wafer cream spreader||Wafer vertical cooling cabinet||Wafer sheet conveyor||Wafer cutter and laminator||Batter mixer||Cream mixer||Wafer smashing machine|
This wafer line machine can smoothly manufacture waffles, and the baked waffles share uniform gloss on the surface while the finished waffle is coated with cream evenly and cut into straight shape. Our product runs steadily, and abnormal noise is avoided. On the other hand, the technical parameters conform with the predetermined specification, and can be used to check the quality of our production line. At the same time, the output and energy consumption are detected as well.
Production speed: 23 pieces per minute
1. 50g wafer: cream:biscuit=1:1, 5 slices of biscuit and 4 layers of coating, 3.45 tons/24 hours
2. 50g wafer: cream:biscuit=1.25:1, 5 slices of biscuit and 4 layers of coating, 3.88 tons/24 hours
3. 50g wafer: cream:biscuit=1.35:1, 5 slices of biscuit and 4 layers of coating, 4.06 tons/24 hours
4. 50g wafer: cream:biscuit=1.5:1, 5 slices of biscuit and 4 layers of coating, 4.32 tons/24 hours
As an experienced 39 mould fully automatic wafer line machine manufacturer and supplier in China, our company also provides 51 mould fully automatic flat wafer line, soft wafer biscuit production line, chocolate hazelnut ball production line, and more.
Full Automatic Cracker Product Equipment | Full Automation Cookies Beltline | Full-automatic Biscuit Making Line